Free rose SVG

Rose flower with three leaves SVG

Rose flower with three leaves, as a solid black shape — Rose flower with three leaves. The preview is the SVG file itself.

The open rose with three saw-edged leaves showing behind it, each with a slit for its midrib. Cut it whole in one colour, or cut the leaves again in green.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 90 mm (3.94 × 3.55 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,388 mm at this size
Narrowest part	1.5 mm at this size
Nodes	821 curve and line segments

Measured from the file. PNG: 2,000 × 1,810 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.9 in (25 × 23 mm)	0.38 mm	353 mm	110	Too fine for most machines
2 × 1.8 in (51 × 46 mm)	0.76 mm	705 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.7 in (76 × 69 mm)	1.1 mm	1,058 mm	12	Vinyl, card and thin sheet
4 × 3.6 in (102 × 92 mm)	1.5 mm	1,410 mm	6	Vinyl, card and thin sheet
6 × 5.41 in (152 × 137 mm)	2.3 mm	2,115 mm	2	Vinyl, card and thin sheet
8 × 7.21 in (203 × 183 mm)	3 mm	2,820 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.81 in (305 × 275 mm)	4.6 mm	4,231 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rose SVG files

← Simple rose with twelve petals All 14 roses Rose outline →