Free rose SVG

Rose bud on a stem SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rose bud on a stem, as a solid black shape
Rose bud on a stem. The preview is the SVG file itself.

A closed bud wrapped by two petals, with long sepals rising round it, on a stem with one leaf of three leaflets. Smaller and plainer than the open bloom.

This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.

What is in the file

Size43 × 100 mm (1.69 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length482 mm at this size
Narrowest part1.9 mm at this size
Nodes137 curve and line segments

Measured from the file. PNG: 904 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.43 × 1 in (11 × 25 mm)0.48 mm122 mm190Too fine for most machines
0.86 × 2 in (22 × 51 mm)0.97 mm245 mm55Fine detail: vinyl and paper only, weed with care
1.29 × 3 in (33 × 76 mm)1.4 mm367 mm24Vinyl, card and thin sheet
1.72 × 4 in (44 × 102 mm)1.9 mm490 mm12Vinyl, card and thin sheet
2.58 × 6 in (66 × 152 mm)2.9 mm735 mm4Vinyl, card and thin sheet
3.44 × 8 in (87 × 203 mm)3.9 mm979 mm3Any material, including 3 mm wood and acrylic
5.16 × 12 in (131 × 305 mm)5.8 mm1,469 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rose SVG files

← Long stemmed rose All 14 roses Rose silhouette →