Free rose SVG

Rose leaf with five leaflets SVG

Rose leaf with five leaflets, as a solid black shape
Rose leaf with five leaflets. The preview is the SVG file itself.

A whole rose leaf as it grows: two pairs of saw-edged leaflets and a larger one at the tip, on one stalk, each with a slit for its midrib.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size67 × 100 mm (2.63 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length777 mm at this size
Narrowest part3.5 mm at this size
Nodes219 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,363 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.67 × 1 in (17 × 25 mm)0.89 mm197 mm140Fine detail: vinyl and paper only, weed with care
1.34 × 2 in (34 × 51 mm)1.8 mm395 mm35Vinyl, card and thin sheet
2.01 × 3 in (51 × 76 mm)2.7 mm592 mm15Vinyl, card and thin sheet
2.68 × 4 in (68 × 102 mm)3.6 mm789 mm8Any material, including 3 mm wood and acrylic
4.01 × 6 in (102 × 152 mm)5.3 mm1,184 mm2Any material, including 3 mm wood and acrylic
5.35 × 8 in (136 × 203 mm)7.1 mm1,579 mm2Any material, including 3 mm wood and acrylic
8.03 × 12 in (204 × 305 mm)11 mm2,368 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rose SVG files

← Rose silhouette All 14 roses Rose leaves, a sprig of three →