Free roller skate SVG

Layered roller skate in five colours SVG

Layered roller skate in five colours, in layered colours
Layered roller skate in five colours. The preview is the SVG file itself.

Five layers to stack, facing left and tipped back a little: a cream boot, a dark sole with its plate, trucks and tyres, teal stripes, laces and bow, yellow hubs and a red toe stop.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size70 × 100 mm (2.76 × 3.94 in), scales to any size
Pieces12 separate pieces
Outlines to cut14: 12 outer edges and 2 cut-outs
Cut length1,071 mm at this size
Narrowest part3.4 mm at this size
Nodes194 curve and line segments
Layers5: boot, sole and wheels, stripes and laces, hubs and toe stop

Measured from the file. PNG: 1,425 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)0.86 mm272 mm130Fine detail: vinyl and paper only, weed with care
1.4 × 2 in (36 × 51 mm)1.7 mm544 mm35Vinyl, card and thin sheet
2.1 × 3 in (53 × 76 mm)2.6 mm816 mm15Vinyl, card and thin sheet
2.8 × 4 in (71 × 102 mm)3.5 mm1,088 mm8Any material, including 3 mm wood and acrylic
4.21 × 6 in (107 × 152 mm)5.2 mm1,632 mm2Any material, including 3 mm wood and acrylic
5.61 × 8 in (142 × 203 mm)6.9 mm2,176 mm2Any material, including 3 mm wood and acrylic
8.41 × 12 in (214 × 305 mm)10 mm3,264 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More roller skate SVG files

← Pair of ice skates All 16 roller skates Retro roller skate with stripes →