Free roller skate SVG

Roller skate outline SVG

Roller skate outline, drawn as a line
Roller skate outline. The preview is the SVG file itself.

The skate as an even line: the boot with its laces and bow, the plate, both trucks, two wheels with ring hubs and the toe stop. For colouring pages, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size77 × 100 mm (3.02 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length1,248 mm at this size
Narrowest part1.8 mm at this size
Nodes210 curve and line segments

Measured from the file. PNG: 1,554 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (20 × 25 mm)0.46 mm317 mm120Too fine for most machines
1.54 × 2 in (39 × 51 mm)0.91 mm634 mm35Fine detail: vinyl and paper only, weed with care
2.3 × 3 in (59 × 76 mm)1.4 mm951 mm12Vinyl, card and thin sheet
3.07 × 4 in (78 × 102 mm)1.8 mm1,268 mm6Vinyl, card and thin sheet
4.61 × 6 in (117 × 152 mm)2.7 mm1,902 mm2Vinyl, card and thin sheet
6.14 × 8 in (156 × 203 mm)3.7 mm2,536 mm1Any material, including 3 mm wood and acrylic
9.22 × 12 in (234 × 305 mm)5.5 mm3,804 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More roller skate SVG files

← Roller skate silhouette All 16 roller skates Pair of roller skates →