Free roller skate SVG

Roller skate with wings SVG

Roller skate with wings, as a solid black shape
Roller skate with wings. The preview is the SVG file itself.

The retro skate with a feathered wing sweeping back from the heel, seven feathers long. A badge for a skate club, a rink party or anyone who flies round the floor.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 92 mm (3.94 × 3.6 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length1,101 mm at this size
Narrowest part2.6 mm at this size
Nodes232 curve and line segments

Measured from the file. PNG: 2,000 × 1,837 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.66 mm280 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.83 in (51 × 46 mm)1.3 mm559 mm30Vinyl, card and thin sheet
3 × 2.74 in (76 × 70 mm)2 mm839 mm12Vinyl, card and thin sheet
4 × 3.66 in (102 × 93 mm)2.6 mm1,119 mm6Vinyl, card and thin sheet
6 × 5.49 in (152 × 139 mm)4 mm1,678 mm2Any material, including 3 mm wood and acrylic
8 × 7.32 in (203 × 186 mm)5.3 mm2,237 mm1Any material, including 3 mm wood and acrylic
12 × 10.98 in (305 × 279 mm)7.9 mm3,356 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More roller skate SVG files

← Roller skates hanging by their laces All 16 roller skates Roller derby skate with a star →