Free roller skate SVG

Disco ball for a roller skate party SVG

Disco ball for a roller skate party, as a solid black shape
Disco ball for a roller skate party. The preview is the SVG file itself.

A mirror ball on its chain, tiled in seven rows that narrow towards the edge so it looks round, with a four-pointed glint on its upper and lower edge. Put silver or holographic vinyl behind the tiles.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size77 × 100 mm (3.02 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut50: 1 outer edge and 49 cut-outs
Cut length1,527 mm at this size
Narrowest part2 mm at this size
Nodes434 curve and line segments

Measured from the file. PNG: 1,554 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (20 × 25 mm)0.51 mm388 mm120Fine detail: vinyl and paper only, weed with care
1.54 × 2 in (39 × 51 mm)1 mm776 mm35Vinyl, card and thin sheet
2.3 × 3 in (59 × 76 mm)1.5 mm1,164 mm12Vinyl, card and thin sheet
3.07 × 4 in (78 × 102 mm)2 mm1,551 mm6Vinyl, card and thin sheet
4.61 × 6 in (117 × 152 mm)3 mm2,327 mm2Any material, including 3 mm wood and acrylic
6.14 × 8 in (156 × 203 mm)4.1 mm3,103 mm1Any material, including 3 mm wood and acrylic
9.22 × 12 in (234 × 305 mm)6.1 mm4,654 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More roller skate SVG files

← Inline roller skate with four wheels All 16 roller skates Roller skate monogram frame →