Free roller skate SVG

Pair of ice skates SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pair of ice skates, as a solid black shape
Pair of ice skates. The preview is the SVG file itself.

Two figure skates, one a little behind the other: tall laced boots on long blades with a toe pick and a curl at the tip. Separate pieces by design, with a slim gap between them.

What is in the file

Size100 × 96 mm (3.94 × 3.78 in), scales to any size
Pieces2 separate pieces
Outlines to cut14: 2 outer edges and 12 cut-outs
Cut length1,166 mm at this size
Narrowest part1 mm at this size
Nodes239 curve and line segments

Measured from the file. PNG: 2,000 × 1,921 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.25 mm296 mm100Too fine for most machines
2 × 1.92 in (51 × 49 mm)0.51 mm592 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.88 in (76 × 73 mm)0.76 mm888 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.84 in (102 × 97 mm)1 mm1,185 mm6Vinyl, card and thin sheet
6 × 5.75 in (152 × 146 mm)1.5 mm1,777 mm2Vinyl, card and thin sheet
8 × 7.67 in (203 × 195 mm)2 mm2,369 mm1Vinyl, card and thin sheet
12 × 11.51 in (305 × 292 mm)3 mm3,554 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More roller skate SVG files

← Simple roller skate for children All 16 roller skates Layered roller skate in five colours →