Free roller skate SVG

Retro roller skate with stripes SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Retro roller skate with stripes, as a solid black shape
Retro roller skate with stripes. The preview is the SVG file itself.

A high-topped quad skate in profile: five laces and a bow, two stripes on the side, a seam above the sole, two wheels with their hubs and a round toe stop. One piece from bow to wheels.

What is in the file

Size77 × 100 mm (3.02 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length993 mm at this size
Narrowest part1 mm at this size
Nodes196 curve and line segments

Measured from the file. PNG: 1,554 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.77 × 1 in (20 × 25 mm)0.25 mm252 mm120Too fine for most machines
1.54 × 2 in (39 × 51 mm)0.51 mm504 mm35Fine detail: vinyl and paper only, weed with care
2.3 × 3 in (59 × 76 mm)0.76 mm757 mm12Fine detail: vinyl and paper only, weed with care
3.07 × 4 in (78 × 102 mm)1 mm1,009 mm6Vinyl, card and thin sheet
4.61 × 6 in (117 × 152 mm)1.5 mm1,513 mm2Vinyl, card and thin sheet
6.14 × 8 in (156 × 203 mm)2 mm2,018 mm1Vinyl, card and thin sheet
9.22 × 12 in (234 × 305 mm)3 mm3,027 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More roller skate SVG files

← Layered roller skate in five colours All 16 roller skates Roller skate silhouette →