Rad tech holding up an x-ray SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rad tech seen from the front in a lead apron with a thyroid collar and a belt, holding a chest film up to the light in one hand. The face is blank and the apron carries a small heart, not a warning sign.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 67 × 100 mm (2.64 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 755 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 170 curve and line segments |
| Also found as | Xray tech SVG |
Measured from the file. PNG: 1,365 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.67 × 1 in (17 × 25 mm) | 0.61 mm | 192 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 1.34 × 2 in (34 × 51 mm) | 1.2 mm | 384 mm | 35 | Vinyl, card and thin sheet |
| 2.01 × 3 in (51 × 76 mm) | 1.8 mm | 575 mm | 15 | Vinyl, card and thin sheet |
| 2.68 × 4 in (68 × 102 mm) | 2.4 mm | 767 mm | 8 | Vinyl, card and thin sheet |
| 4.02 × 6 in (102 × 152 mm) | 3.7 mm | 1,151 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.36 × 8 in (136 × 203 mm) | 4.9 mm | 1,534 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.04 × 12 in (204 × 305 mm) | 7.3 mm | 2,301 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More rad tech SVG files
-
Rad tech silhouette by the x-ray table Solid · one piece -
Rad tech x-ray of a hand Solid · one piece -
Rad tech chest x-ray Solid · one piece -
Rad tech rib cage Solid · one piece -
Rad tech x-ray table and tube stand Solid · one piece -
Rad tech C-arm Solid · one piece -
Rad tech lead apron with a thyroid collar Solid · one piece -
Rad tech heart with a rib cage Solid · one piece
← Layered rad tech in seven colours All 16 rad techs Rad tech silhouette by the x-ray table →