Free rad tech SVG

Rad tech x-ray of a hand SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rad tech x-ray of a hand, as a solid black shape
Rad tech x-ray of a hand. The preview is the SVG file itself.

A sheet of film with the bones of a hand cut out of it: four fingers, a thumb, the small bones of the wrist and the ends of the forearm. A notch at one corner marks it as film.

What is in the file

Size78 × 100 mm (3.07 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut29: 1 outer edge and 28 cut-outs
Cut length1,094 mm at this size
Narrowest part1 mm at this size
Nodes201 curve and line segments

Measured from the file. PNG: 1,577 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.78 × 1 in (20 × 25 mm)0.25 mm278 mm120Too fine for most machines
1.56 × 2 in (40 × 51 mm)0.51 mm556 mm30Fine detail: vinyl and paper only, weed with care
2.34 × 3 in (59 × 76 mm)0.76 mm834 mm12Fine detail: vinyl and paper only, weed with care
3.12 × 4 in (79 × 102 mm)1 mm1,112 mm6Vinyl, card and thin sheet
4.68 × 6 in (119 × 152 mm)1.5 mm1,667 mm2Vinyl, card and thin sheet
6.24 × 8 in (158 × 203 mm)2 mm2,223 mm1Vinyl, card and thin sheet
9.36 × 12 in (238 × 305 mm)3 mm3,335 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rad tech SVG files

← Rad tech silhouette by the x-ray table All 16 rad techs Rad tech chest x-ray →