Free rad tech SVG

Rad tech chest x-ray SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rad tech chest x-ray, as a solid black shape
Rad tech chest x-ray. The preview is the SVG file itself.

A chest film: two collar bones, the breastbone, a spine and six pairs of ribs cut out of a dark sheet with one notched corner. The ribs never touch, so the sheet stays in one piece.

What is in the file

Size80 × 100 mm (3.15 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length1,284 mm at this size
Narrowest part4 mm at this size
Nodes162 curve and line segments
Also found asXray SVG

Measured from the file. PNG: 1,615 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)1 mm326 mm120Vinyl, card and thin sheet
1.6 × 2 in (41 × 51 mm)2 mm652 mm30Vinyl, card and thin sheet
2.4 × 3 in (61 × 76 mm)3 mm978 mm12Any material, including 3 mm wood and acrylic
3.2 × 4 in (81 × 102 mm)4.1 mm1,305 mm6Any material, including 3 mm wood and acrylic
4.8 × 6 in (122 × 152 mm)6.1 mm1,957 mm2Any material, including 3 mm wood and acrylic
6.4 × 8 in (163 × 203 mm)8.1 mm2,609 mm1Any material, including 3 mm wood and acrylic
9.6 × 12 in (244 × 305 mm)12 mm3,914 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rad tech SVG files

← Rad tech x-ray of a hand All 16 rad techs Rad tech rib cage →