Free rad tech SVG

Rad tech lead apron with a thyroid collar SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rad tech lead apron with a thyroid collar, as a solid black shape
Rad tech lead apron with a thyroid collar. The preview is the SVG file itself.

A lead apron laid flat with its thyroid collar above: wide shoulders, a wrap front, a belt with a buckle, a hem line and a heart on the chest. A bold shape for a locker or a tumbler.

What is in the file

Size66 × 100 mm (2.58 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length909 mm at this size
Narrowest part1 mm at this size
Nodes98 curve and line segments

Measured from the file. PNG: 1,338 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.66 × 1 in (17 × 25 mm)0.25 mm231 mm140Too fine for most machines
1.31 × 2 in (33 × 51 mm)0.51 mm462 mm40Fine detail: vinyl and paper only, weed with care
1.97 × 3 in (50 × 76 mm)0.76 mm693 mm15Fine detail: vinyl and paper only, weed with care
2.62 × 4 in (67 × 102 mm)1 mm924 mm8Vinyl, card and thin sheet
3.94 × 6 in (100 × 152 mm)1.5 mm1,385 mm2Vinyl, card and thin sheet
5.25 × 8 in (133 × 203 mm)2 mm1,847 mm2Vinyl, card and thin sheet
7.87 × 12 in (200 × 305 mm)3 mm2,771 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rad tech SVG files

← Rad tech C-arm All 16 rad techs Rad tech heart with a rib cage →