Free pie SVG

Slice of pie on a plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Slice of pie on a plate, as a solid black shape — Slice of pie on a plate. The preview is the SVG file itself.

The slice with its cream, served on an oval plate drawn as two rings, the rim and the well. Wider than the slice alone, so it sits well on a menu board or a recipe card.

What is in the file

Size	100 × 54 mm (3.94 × 2.12 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	977 mm at this size
Narrowest part	1.5 mm at this size
Nodes	114 curve and line segments

Measured from the file. PNG: 2,000 × 1,112 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.54 in (25 × 14 mm)	0.38 mm	248 mm	160	Too fine for most machines
2 × 1.08 in (51 × 27 mm)	0.76 mm	496 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.61 in (76 × 41 mm)	1.1 mm	744 mm	18	Vinyl, card and thin sheet
4 × 2.15 in (102 × 55 mm)	1.5 mm	993 mm	10	Vinyl, card and thin sheet
6 × 3.23 in (152 × 82 mm)	2.3 mm	1,489 mm	3	Vinyl, card and thin sheet
8 × 4.3 in (203 × 109 mm)	3 mm	1,985 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.46 in (305 × 164 mm)	4.6 mm	2,978 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pie SVG files

← Lattice pie in a dish, front view All 12 pies Pie outline, side view →