Free pie SVG

Lattice pie in a dish, front view SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lattice pie in a dish, front view, as a solid black shape
Lattice pie in a dish, front view. The preview is the SVG file itself.

The lattice pie seen from in front and above, so the round top becomes an oval over the sloping side of the dish. A thin gap follows the crimped edge, with three posts across it. It fills a wide label better than the round view.

What is in the file

Size100 × 55 mm (3.94 × 2.18 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut20: 1 outer edge and 19 cut-outs
Cut length762 mm at this size
Narrowest part4.6 mm at this size
Nodes220 curve and line segments

Measured from the file. PNG: 2,000 × 1,140 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)1.2 mm194 mm160Vinyl, card and thin sheet
2 × 1.11 in (51 × 28 mm)2.3 mm387 mm45Vinyl, card and thin sheet
3 × 1.66 in (76 × 42 mm)3.5 mm581 mm18Any material, including 3 mm wood and acrylic
4 × 2.21 in (102 × 56 mm)4.7 mm774 mm10Any material, including 3 mm wood and acrylic
6 × 3.32 in (152 × 84 mm)7 mm1,161 mm3Any material, including 3 mm wood and acrylic
8 × 4.42 in (203 × 112 mm)9.3 mm1,548 mm2Any material, including 3 mm wood and acrylic
12 × 6.64 in (305 × 169 mm)14 mm2,323 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pie SVG files

← Pie with one slice gone All 12 pies Slice of pie on a plate →