Free pie SVG

Pie outline, side view SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pie outline, side view, drawn as a line
Pie outline, side view. The preview is the SVG file itself.

The pie in its dish as a line about 2 mm wide, with the lip and three flutes of the dish drawn in. The three vents on the top are loose marks inside the outline. For colouring, pen plotting, or engraving on a wooden server.

What is in the file

Size100 × 49 mm (3.94 × 1.91 in), scales to any size
Pieces4 separate pieces
Outlines to cut6: 4 outer edges and 2 cut-outs
Cut length753 mm at this size
Narrowest part1.8 mm at this size
Nodes115 curve and line segments

Measured from the file. PNG: 2,000 × 1,012 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 12 mm)0.46 mm191 mm170Too fine for most machines
2 × 0.97 in (51 × 25 mm)0.91 mm383 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.46 in (76 × 37 mm)1.4 mm574 mm21Vinyl, card and thin sheet
4 × 1.94 in (102 × 49 mm)1.8 mm765 mm10Vinyl, card and thin sheet
6 × 2.92 in (152 × 74 mm)2.7 mm1,148 mm3Vinyl, card and thin sheet
8 × 3.89 in (203 × 99 mm)3.7 mm1,530 mm2Any material, including 3 mm wood and acrylic
12 × 5.83 in (305 × 148 mm)5.5 mm2,295 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pie SVG files

← Slice of pie on a plate All 12 pies Slice of pumpkin pie in four colours →