Whole pie in a dish with steam SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pie fresh from the oven, seen from the side: a domed top with three vents, a crimped edge, a dish with a lip and three curls of steam rising from the crust. The steam is welded to the pie, so it all cuts as one piece.
What is in the file
| Size | 100 × 81 mm (3.94 × 3.2 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 703 mm at this size |
| Narrowest part | 5.5 mm at this size |
| Nodes | 115 curve and line segments |
| Also found as | Baked pie SVG |
Measured from the file. PNG: 2,000 × 1,638 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.81 in (25 × 21 mm) | 1.4 mm | 179 mm | 120 | Vinyl, card and thin sheet |
| 2 × 1.62 in (51 × 41 mm) | 2.8 mm | 357 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.44 in (76 × 62 mm) | 4.2 mm | 536 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.25 in (102 × 82 mm) | 5.6 mm | 714 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.87 in (152 × 124 mm) | 8.4 mm | 1,071 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.5 in (203 × 165 mm) | 11 mm | 1,428 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.74 in (305 × 247 mm) | 17 mm | 2,143 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More pie SVG files
-
Apple pie with a lattice top Solid · one piece -
Pumpkin pie from above Solid · one piece -
Slice of pie with cream Solid · one piece -
Pecan pie from above Solid · one piece -
Pie with five heart vents Solid · one piece -
Thanksgiving pie with maple leaf vents Solid · one piece -
Pie with one slice gone Solid · one piece -
Lattice pie in a dish, front view Solid · one piece
← Slice of pumpkin pie in four colours All 12 pies Apple pie with a lattice top →