Free pie SVG

Slice of pie with cream SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Slice of pie with cream, as a solid black shape — Slice of pie with cream. The preview is the SVG file itself.

One slice seen from the front and a little above: the top, the cut side with four small marks in the filling, a crimped crust at the back and a swirl of cream on top. A slit divides the top from the side.

What is in the file

Size	100 × 49 mm (3.94 × 1.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	743 mm at this size
Narrowest part	1.8 mm at this size
Nodes	70 curve and line segments

Measured from the file. PNG: 2,000 × 1,027 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.49 in (25 × 13 mm)	0.46 mm	189 mm	170	Too fine for most machines
2 × 0.99 in (51 × 25 mm)	0.91 mm	377 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.48 in (76 × 38 mm)	1.4 mm	566 mm	21	Vinyl, card and thin sheet
4 × 1.98 in (102 × 50 mm)	1.8 mm	755 mm	10	Vinyl, card and thin sheet
6 × 2.96 in (152 × 75 mm)	2.7 mm	1,132 mm	3	Vinyl, card and thin sheet
8 × 3.95 in (203 × 100 mm)	3.7 mm	1,510 mm	2	Any material, including 3 mm wood and acrylic
12 × 5.93 in (305 × 151 mm)	5.5 mm	2,265 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pie SVG files

← Pumpkin pie from above All 12 pies Pecan pie from above →