Photo booth props photo strips SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two strips of booth photographs fanned out like a pair of cards and joined where they meet at the foot: three empty frames on each and a small heart below them. One piece, the same on both sides. For invitations and guest books.
What is in the file
| Size | 94 × 100 mm (3.71 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 1,068 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 79 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,890 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.94 × 1 in (24 × 25 mm) | 0.97 mm | 271 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.89 × 2 in (48 × 51 mm) | 1.9 mm | 543 mm | 25 | Vinyl, card and thin sheet |
| 2.83 × 3 in (72 × 76 mm) | 2.9 mm | 814 mm | 12 | Vinyl, card and thin sheet |
| 3.77 × 4 in (96 × 102 mm) | 3.9 mm | 1,085 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.66 × 6 in (144 × 152 mm) | 5.8 mm | 1,628 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.54 × 8 in (192 × 203 mm) | 7.7 mm | 2,170 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.32 × 12 in (287 × 305 mm) | 12 mm | 3,255 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More photo booth prop SVG files
-
Photo booth props frame to hold up Solid · one piece -
Layered photo booth props, hat to bow tie Layered · 5 pieces -
Photo booth props sheet of six on sticks Solid · 6 pieces -
Photo booth props moustache on a stick Solid · one piece -
Photo booth props lips on a stick Solid · one piece -
Photo booth props glasses on a stick Solid · one piece -
Photo booth props top hat on a stick Solid · one piece -
Photo booth props bow tie on a stick Solid · one piece
← Photo booth props sign with an arrow All 15 photo booth props Photo booth props frame to hold up →