Layered photo booth props, hat to bow tie SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A whole disguise in three colours, with no sticks: a black top hat and round glasses, a brown moustache, and red for the bow tie and the band of the hat. Stack the red band on the hat, or cut the four props apart and mount each on its own stick.
What is in the file
| Size | 56 × 100 mm (2.19 × 3.94 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 11: 5 outer edges and 6 cut-outs |
| Cut length | 799 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 142 curve and line segments |
| Layers | 3: hat and glasses, moustache and bow tie and band |
Measured from the file. PNG: 1,144 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.56 × 1 in (14 × 25 mm) | 0.69 mm | 203 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 1.11 × 2 in (28 × 51 mm) | 1.4 mm | 406 mm | 45 | Vinyl, card and thin sheet |
| 1.67 × 3 in (42 × 76 mm) | 2.1 mm | 609 mm | 18 | Vinyl, card and thin sheet |
| 2.22 × 4 in (56 × 102 mm) | 2.7 mm | 812 mm | 10 | Vinyl, card and thin sheet |
| 3.33 × 6 in (85 × 152 mm) | 4.1 mm | 1,218 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.44 × 8 in (113 × 203 mm) | 5.5 mm | 1,624 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.66 × 12 in (169 × 305 mm) | 8.2 mm | 2,435 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More photo booth prop SVG files
-
Photo booth props sheet of six on sticks Solid · 6 pieces -
Photo booth props moustache on a stick Solid · one piece -
Photo booth props lips on a stick Solid · one piece -
Photo booth props glasses on a stick Solid · one piece -
Photo booth props top hat on a stick Solid · one piece -
Photo booth props bow tie on a stick Solid · one piece -
Photo booth props monocle on a stick Solid · one piece -
Photo booth props crown on a stick Solid · one piece
← Photo booth props frame to hold up All 15 photo booth props Photo booth props sheet of six on sticks →