Photo booth props moustache on a stick SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A handlebar moustache whose two lobes swell and curl up to a point, with the stick fixed under one side so the hand stays out of the picture. One piece. Cut 130 mm wide, the stick is 7 mm across.
What is in the file
| Size | 100 × 76 mm (3.94 × 3.01 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 1 outline |
| Cut length | 356 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 78 curve and line segments |
Measured from the file. PNG: 2,000 × 1,546 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.76 in (25 × 19 mm) | Over 1.5 mm | 90 mm | 120 | Vinyl, card and thin sheet |
| 2 × 1.53 in (51 × 39 mm) | Over 3 mm | 181 mm | 35 | Any material, including 3 mm wood and acrylic |
| 3 × 2.29 in (76 × 58 mm) | Over 4.6 mm | 271 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.06 in (102 × 78 mm) | Over 6.1 mm | 362 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.58 in (152 × 116 mm) | Over 9.1 mm | 543 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.11 in (203 × 155 mm) | Over 12 mm | 723 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.17 in (305 × 233 mm) | Over 18 mm | 1,085 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More photo booth prop SVG files
-
Photo booth props lips on a stick Solid · one piece -
Photo booth props glasses on a stick Solid · one piece -
Photo booth props top hat on a stick Solid · one piece -
Photo booth props bow tie on a stick Solid · one piece -
Photo booth props monocle on a stick Solid · one piece -
Photo booth props crown on a stick Solid · one piece -
Photo booth props party mask on a stick Solid · one piece -
Photo booth props speech bubbles, blank Solid · 2 pieces
← Photo booth props sheet of six on sticks All 15 photo booth props Photo booth props lips on a stick →