Photo booth props bow tie on a stick SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A bow tie with two wings, a knot and two fold lines cut in each wing, on a stick from the knot. One piece, the same on both sides. Cut 130 mm wide and hold it under the chin.
What is in the file
| Size | 100 × 96 mm (3.94 × 3.78 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 592 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 44 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,923 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.96 in (25 × 24 mm) | Over 1.5 mm | 150 mm | 100 | Vinyl, card and thin sheet |
| 2 × 1.92 in (51 × 49 mm) | Over 3 mm | 301 mm | 25 | Any material, including 3 mm wood and acrylic |
| 3 × 2.88 in (76 × 73 mm) | Over 4.6 mm | 451 mm | 9 | Any material, including 3 mm wood and acrylic |
| 4 × 3.84 in (102 × 98 mm) | Over 6.1 mm | 601 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.76 in (152 × 146 mm) | Over 9.1 mm | 902 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.68 in (203 × 195 mm) | Over 12 mm | 1,203 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.52 in (305 × 293 mm) | Over 18 mm | 1,804 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More photo booth prop SVG files
-
Photo booth props monocle on a stick Solid · one piece -
Photo booth props crown on a stick Solid · one piece -
Photo booth props party mask on a stick Solid · one piece -
Photo booth props speech bubbles, blank Solid · 2 pieces -
Photo booth props wedding sheet on sticks Solid · 6 pieces -
Photo booth props sign with an arrow Solid · one piece -
Photo booth props photo strips Solid · one piece -
Photo booth props frame to hold up Solid · one piece
← Photo booth props top hat on a stick All 15 photo booth props Photo booth props monocle on a stick →