Photo booth props speech bubbles, blank SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two blank signs to write on, each with its own stick: a rounded speech bubble with a tail and a fine line inside its edge, and a burst with fourteen points for a shout. Two loose pieces. Cut each about 180 mm wide.
What is in the file
| Size | 100 × 76 mm (3.94 × 2.98 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 7: 2 outer edges and 5 cut-outs |
| Cut length | 716 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 134 curve and line segments |
| Also found as | Speak bubbles photo booth props SVG |
Measured from the file. PNG: 2,000 × 1,531 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.76 in (25 × 19 mm) | 0.76 mm | 182 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.51 in (51 × 38 mm) | 1.5 mm | 364 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.27 in (76 × 58 mm) | 2.3 mm | 546 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.02 in (102 × 77 mm) | 3 mm | 727 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.54 in (152 × 115 mm) | 4.6 mm | 1,091 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.05 in (203 × 154 mm) | 6.1 mm | 1,455 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.07 in (305 × 230 mm) | 9.1 mm | 2,182 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More photo booth prop SVG files
-
Photo booth props wedding sheet on sticks Solid · 6 pieces -
Photo booth props sign with an arrow Solid · one piece -
Photo booth props photo strips Solid · one piece -
Photo booth props frame to hold up Solid · one piece -
Layered photo booth props, hat to bow tie Layered · 5 pieces -
Photo booth props sheet of six on sticks Solid · 6 pieces -
Photo booth props moustache on a stick Solid · one piece -
Photo booth props lips on a stick Solid · one piece
← Photo booth props party mask on a stick All 15 photo booth props Photo booth props wedding sheet on sticks →