Photo booth props lips on a stick SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Full lips with a cupid’s bow, a parting line that stops short of the corners and a glint on the lower lip, on a stick from the middle. One piece. Cut 110 mm wide in red card, the stick is 7 mm across.
What is in the file
| Size | 96 × 100 mm (3.78 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 3: 1 outer edge and 2 cut-outs |
| Cut length | 519 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 52 curve and line segments |
Measured from the file. PNG: 1,925 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.96 × 1 in (24 × 25 mm) | Over 1.5 mm | 132 mm | 100 | Vinyl, card and thin sheet |
| 1.92 × 2 in (49 × 51 mm) | Over 3 mm | 264 mm | 25 | Any material, including 3 mm wood and acrylic |
| 2.88 × 3 in (73 × 76 mm) | Over 4.6 mm | 395 mm | 9 | Any material, including 3 mm wood and acrylic |
| 3.84 × 4 in (98 × 102 mm) | Over 6.1 mm | 527 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.77 × 6 in (146 × 152 mm) | Over 9.1 mm | 791 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.69 × 8 in (195 × 203 mm) | Over 12 mm | 1,055 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.53 × 12 in (293 × 305 mm) | Over 18 mm | 1,582 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More photo booth prop SVG files
-
Photo booth props glasses on a stick Solid · one piece -
Photo booth props top hat on a stick Solid · one piece -
Photo booth props bow tie on a stick Solid · one piece -
Photo booth props monocle on a stick Solid · one piece -
Photo booth props crown on a stick Solid · one piece -
Photo booth props party mask on a stick Solid · one piece -
Photo booth props speech bubbles, blank Solid · 2 pieces -
Photo booth props wedding sheet on sticks Solid · 6 pieces
← Photo booth props moustache on a stick All 15 photo booth props Photo booth props glasses on a stick →