Free peek-a-boo SVG

Peek-a-boo girl with pigtails SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peek-a-boo girl with pigtails, as a solid black shape
Peek-a-boo girl with pigtails. The preview is the SVG file itself.

A girl with a long pigtail leaning out each side, tied close to her head, peeping over a ledge with a hand on the edge each side. For bedroom doors, book bags and the top of a name.

What is in the file

Size100 × 37 mm (3.94 × 1.46 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length751 mm at this size
Narrowest part1 mm at this size
Nodes189 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 790 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.25 mm191 mm210Too fine for most machines
2 × 0.74 in (51 × 19 mm)0.51 mm382 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.11 in (76 × 28 mm)0.76 mm572 mm27Fine detail: vinyl and paper only, weed with care
4 × 1.48 in (102 × 38 mm)1 mm763 mm14Vinyl, card and thin sheet
6 × 2.23 in (152 × 57 mm)1.5 mm1,145 mm5Vinyl, card and thin sheet
8 × 2.97 in (203 × 75 mm)2 mm1,526 mm3Vinyl, card and thin sheet
12 × 4.45 in (305 × 113 mm)3 mm2,289 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More peek-a-boo SVG files

← Peek-a-boo girl with two puffs All 8 peek-a-boo designs Peek-a-boo girl with a top knot →