Free peek-a-boo SVG

Peek-a-boo boy with a quiff SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peek-a-boo boy with a quiff, as a solid black shape
Peek-a-boo boy with a quiff. The preview is the SVG file itself.

A boy with a full head of hair swept up into a quiff on one side and a parting cut across it, looking over a ledge with a hand on the edge each side.

What is in the file

Size100 × 49 mm (3.94 × 1.92 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length626 mm at this size
Narrowest part2.1 mm at this size
Nodes141 curve and line segments

Measured from the file. PNG: 2,000 × 1,013 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 12 mm)0.53 mm159 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.97 in (51 × 25 mm)1.1 mm318 mm50Vinyl, card and thin sheet
3 × 1.46 in (76 × 37 mm)1.6 mm477 mm21Vinyl, card and thin sheet
4 × 1.95 in (102 × 49 mm)2.1 mm636 mm10Vinyl, card and thin sheet
6 × 2.92 in (152 × 74 mm)3.2 mm954 mm3Any material, including 3 mm wood and acrylic
8 × 3.9 in (203 × 99 mm)4.3 mm1,272 mm2Any material, including 3 mm wood and acrylic
12 × 5.84 in (305 × 148 mm)6.4 mm1,908 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More peek-a-boo SVG files

← Peek-a-boo baby with a bow headband All 8 peek-a-boo designs Peek-a-boo boy in a cap →