Free peek-a-boo SVG

Peek-a-boo boy in a cap SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peek-a-boo boy in a cap, as a solid black shape — Peek-a-boo boy in a cap. The preview is the SVG file itself.

A boy in a baseball cap pulled low, the brim straight across and his eyes just under it, peeping over a ledge. The seams of the cap and the line under the brim are cut.

What is in the file

Size	100 × 41 mm (3.94 × 1.6 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	632 mm at this size
Narrowest part	1 mm at this size
Nodes	196 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 858 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.41 in (25 × 10 mm)	0.25 mm	161 mm	200	Too fine for most machines
2 × 0.81 in (51 × 21 mm)	0.51 mm	321 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.22 in (76 × 31 mm)	0.76 mm	482 mm	24	Fine detail: vinyl and paper only, weed with care
4 × 1.62 in (102 × 41 mm)	1 mm	642 mm	12	Vinyl, card and thin sheet
6 × 2.44 in (152 × 62 mm)	1.5 mm	963 mm	4	Vinyl, card and thin sheet
8 × 3.25 in (203 × 82 mm)	2 mm	1,284 mm	3	Vinyl, card and thin sheet
12 × 4.87 in (305 × 124 mm)	3 mm	1,926 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More peek-a-boo SVG files

← Peek-a-boo boy with a quiff All 8 peek-a-boo designs Peek-a-boo girl with a bow →