Free peek-a-boo SVG

Peek-a-boo baby with a bow headband SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peek-a-boo baby with a bow headband, as a solid black shape
Peek-a-boo baby with a bow headband. The preview is the SVG file itself.

A baby in a headband with a small bow to one side, eyelashes and wide eyes, looking over a ledge. A baby girl to pair with the baby with one curl.

What is in the file

Size100 × 43 mm (3.94 × 1.68 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length662 mm at this size
Narrowest part1.7 mm at this size
Nodes188 curve and line segments

Measured from the file. PNG: 2,000 × 898 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.43 mm168 mm190Too fine for most machines
2 × 0.85 in (51 × 22 mm)0.86 mm336 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.28 in (76 × 33 mm)1.3 mm504 mm24Vinyl, card and thin sheet
4 × 1.71 in (102 × 43 mm)1.7 mm673 mm12Vinyl, card and thin sheet
6 × 2.56 in (152 × 65 mm)2.6 mm1,009 mm4Vinyl, card and thin sheet
8 × 3.42 in (203 × 87 mm)3.5 mm1,345 mm3Any material, including 3 mm wood and acrylic
12 × 5.12 in (305 × 130 mm)5.2 mm2,018 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More peek-a-boo SVG files

← Peek-a-boo baby with one curl All 8 peek-a-boo designs Peek-a-boo boy with a quiff →