Free peek-a-boo SVG

Peek-a-boo girl with a bow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peek-a-boo girl with a bow, as a solid black shape
Peek-a-boo girl with a bow. The preview is the SVG file itself.

A girl looking over a ledge with a big bow on top of her head, a fringe, long eyelashes and a hand on the edge each side. Line the ledge up with the top of a pocket, a name or a frame.

What is in the file

Size100 × 46 mm (3.94 × 1.81 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length675 mm at this size
Narrowest part1 mm at this size
Nodes176 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 960 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.25 mm171 mm180Too fine for most machines
2 × 0.92 in (51 × 23 mm)0.51 mm343 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.38 in (76 × 35 mm)0.76 mm514 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.84 in (102 × 47 mm)1 mm686 mm10Vinyl, card and thin sheet
6 × 2.75 in (152 × 70 mm)1.5 mm1,029 mm4Vinyl, card and thin sheet
8 × 3.67 in (203 × 93 mm)2 mm1,372 mm3Vinyl, card and thin sheet
12 × 5.51 in (305 × 140 mm)3 mm2,057 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More peek-a-boo SVG files

← Peek-a-boo boy in a cap All 8 peek-a-boo designs Peek-a-boo girl with two puffs →