Free Papa SVG

Papa with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Papa with stars, as a solid black shape
Papa with stars. The preview is the SVG file itself.

“Papa” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 79 mm (3.94 × 3.12 in), scales to any size
Pieces9 separate pieces
Outlines to cut12: 9 outer edges and 3 cut-outs
Cut length851 mm at this size
Narrowest part1.8 mm at this size
Nodes170 curve and line segments

Measured from the file. PNG: 2,000 × 1,600 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.46 mm216 mm120Too fine for most machines
2 × 1.58 in (51 × 40 mm)0.91 mm432 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.38 in (76 × 60 mm)1.4 mm648 mm12Vinyl, card and thin sheet
4 × 3.17 in (102 × 80 mm)1.8 mm865 mm6Vinyl, card and thin sheet
6 × 4.75 in (152 × 121 mm)2.7 mm1,297 mm2Vinyl, card and thin sheet
8 × 6.34 in (203 × 161 mm)3.7 mm1,729 mm1Any material, including 3 mm wood and acrylic
12 × 9.5 in (305 × 241 mm)5.5 mm2,594 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Papa SVG files

← Papa with a swash underline All 13 Papa designs Papa outline lettering →