Papa in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Papa” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 100 × 59 mm (3.94 × 2.31 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 7: 2 outer edges and 5 cut-outs |
| Cut length | 653 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 128 curve and line segments |
Measured from the file. PNG: 2,000 × 1,204 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.59 in (25 × 15 mm) | 0.71 mm | 166 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.17 in (51 × 30 mm) | 1.4 mm | 332 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.76 in (76 × 45 mm) | 2.1 mm | 498 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.34 in (102 × 60 mm) | 2.8 mm | 663 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.52 in (152 × 89 mm) | 4.3 mm | 995 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.69 in (203 × 119 mm) | 5.7 mm | 1,327 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.03 in (305 × 179 mm) | 8.5 mm | 1,990 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Papa SVG files
-
Papa in Lobster Solid · 3 pieces
-
Papa in Kaushan Script Solid · 4 pieces
-
Papa in Lilita One Solid · 4 pieces
-
Papa in Alfa Slab One Solid · 4 pieces
-
Papa in Amatic SC Solid · 4 pieces
-
Papa in block capitals Solid · 4 pieces
-
Papa with a swash underline Solid · 3 pieces
-
Papa with stars Solid · 9 pieces
← Papa with a handlebar moustache All 13 Papa designs Papa in Lobster →