Papa with a swash underline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Papa” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.65 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 8: 3 outer edges and 5 cut-outs |
| Cut length | 827 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 181 curve and line segments |
Measured from the file. PNG: 2,000 × 1,371 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.69 mm | 210 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.35 in (51 × 34 mm) | 1.4 mm | 420 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.02 in (76 × 51 mm) | 2.1 mm | 630 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.69 in (102 × 68 mm) | 2.7 mm | 840 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.04 in (152 × 103 mm) | 4.1 mm | 1,260 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.38 in (203 × 137 mm) | 5.5 mm | 1,680 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.08 in (305 × 205 mm) | 8.2 mm | 2,521 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Papa SVG files
-
Papa with stars Solid · 9 pieces
-
Papa outline lettering Outline · 8 pieces
-
Papa stencil plate Solid · one piece
-
Papa with a drop shadow Layered · 4 pieces
-
Papa with a handlebar moustache Solid · 4 pieces
-
Papa in Pacifico Solid · 2 pieces
-
Papa in Lobster Solid · 3 pieces
-
Papa in Kaushan Script Solid · 4 pieces
← Papa in block capitals All 13 Papa designs Papa with stars →