Free Papa SVG

Papa with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Papa with a drop shadow, in layered colours
Papa with a drop shadow. The preview is the SVG file itself.

“Papa” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 60 mm (3.94 × 2.35 in), scales to any size
Pieces4 separate pieces
Outlines to cut14: 4 outer edges and 10 cut-outs
Cut length1,189 mm at this size
Narrowest part2.1 mm at this size
Nodes238 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,227 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.53 mm302 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.2 in (51 × 30 mm)1.1 mm604 mm40Vinyl, card and thin sheet
3 × 1.79 in (76 × 46 mm)1.6 mm906 mm18Vinyl, card and thin sheet
4 × 2.39 in (102 × 61 mm)2.1 mm1,208 mm8Vinyl, card and thin sheet
6 × 3.59 in (152 × 91 mm)3.2 mm1,812 mm3Any material, including 3 mm wood and acrylic
8 × 4.78 in (203 × 122 mm)4.3 mm2,416 mm2Any material, including 3 mm wood and acrylic
12 × 7.18 in (305 × 182 mm)6.4 mm3,624 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Papa SVG files

← Papa stencil plate All 13 Papa designs Papa with a handlebar moustache →