Papa in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Papa” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 71 mm (3.94 × 2.79 in), scales to any size |
|---|---|
| Pieces | 4 separate pieces |
| Outlines to cut | 8: 4 outer edges and 4 cut-outs |
| Cut length | 979 mm at this size |
| Narrowest part | 4.2 mm at this size |
| Nodes | 164 curve and line segments |
Measured from the file. PNG: 2,000 × 1,440 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.71 in (25 × 18 mm) | 1.1 mm | 249 mm | 130 | Vinyl, card and thin sheet |
| 2 × 1.42 in (51 × 36 mm) | 2.1 mm | 497 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.13 in (76 × 54 mm) | 3.2 mm | 746 mm | 15 | Any material, including 3 mm wood and acrylic |
| 4 × 2.84 in (102 × 72 mm) | 4.3 mm | 995 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 4.25 in (152 × 108 mm) | 6.4 mm | 1,492 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.67 in (203 × 144 mm) | 8.5 mm | 1,989 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.51 in (305 × 216 mm) | 13 mm | 2,984 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Papa SVG files
-
Papa in block capitals Solid · 4 pieces
-
Papa with a swash underline Solid · 3 pieces
-
Papa with stars Solid · 9 pieces
-
Papa outline lettering Outline · 8 pieces
-
Papa stencil plate Solid · one piece
-
Papa with a drop shadow Layered · 4 pieces
-
Papa with a handlebar moustache Solid · 4 pieces
-
Papa in Pacifico Solid · 2 pieces
← Papa in Alfa Slab One All 13 Papa designs Papa in block capitals →