Papa stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “PAPA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 50 mm (3.94 × 1.98 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 859 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 122 curve and line segments |
Measured from the file. PNG: 2,000 × 1,042 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.5 in (25 × 13 mm) | 0.43 mm | 218 mm | 170 | Too fine for most machines |
| 2 × 1 in (51 × 26 mm) | 0.86 mm | 436 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.51 in (76 × 38 mm) | 1.3 mm | 655 mm | 21 | Vinyl, card and thin sheet |
| 4 × 2.01 in (102 × 51 mm) | 1.7 mm | 873 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.01 in (152 × 77 mm) | 2.6 mm | 1,309 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.02 in (203 × 102 mm) | 3.5 mm | 1,745 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.02 in (305 × 153 mm) | 5.2 mm | 2,618 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Papa SVG files
-
Papa with a drop shadow Layered · 4 pieces
-
Papa with a handlebar moustache Solid · 4 pieces
-
Papa in Pacifico Solid · 2 pieces
-
Papa in Lobster Solid · 3 pieces
-
Papa in Kaushan Script Solid · 4 pieces
-
Papa in Lilita One Solid · 4 pieces
-
Papa in Alfa Slab One Solid · 4 pieces
-
Papa in Amatic SC Solid · 4 pieces
← Papa outline lettering All 13 Papa designs Papa with a drop shadow →