Free Papa SVG

Papa in Lilita One SVG

Papa in Lilita One, as a solid black shape — Papa in Lilita One. The preview is the SVG file itself.

“Papa” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 43 mm (3.94 × 1.69 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	8: 4 outer edges and 4 cut-outs
Cut length	484 mm at this size
Narrowest part	5.9 mm at this size
Nodes	147 curve and line segments

Measured from the file. PNG: 2,000 × 900 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.43 in (25 × 11 mm)	1.5 mm	123 mm	190	Vinyl, card and thin sheet
2 × 0.86 in (51 × 22 mm)	3 mm	246 mm	55	Vinyl, card and thin sheet
3 × 1.28 in (76 × 33 mm)	4.5 mm	369 mm	24	Any material, including 3 mm wood and acrylic
4 × 1.71 in (102 × 43 mm)	6 mm	492 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.57 in (152 × 65 mm)	9 mm	738 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.42 in (203 × 87 mm)	12 mm	983 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.14 in (305 × 130 mm)	18 mm	1,475 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Papa SVG files

← Papa in Kaushan Script All 12 Papa designs Papa in Alfa Slab One →