Free otter SVG

Swimming otter SVG

Swimming otter, as a solid black shape — Swimming otter. The preview is the SVG file itself.

An otter diving through the water in one long curve from nose to tail tip, with its four paws trailing. A solid shape with an eye, for a row of them chasing each other round a mug.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 44 mm (3.94 × 1.74 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	275 mm at this size
Narrowest part	4.7 mm at this size
Nodes	93 curve and line segments

Measured from the file. PNG: 2,000 × 927 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.44 in (25 × 11 mm)	1.2 mm	70 mm	190	Vinyl, card and thin sheet
2 × 0.88 in (51 × 22 mm)	2.4 mm	140 mm	55	Vinyl, card and thin sheet
3 × 1.33 in (76 × 34 mm)	3.6 mm	210 mm	21	Any material, including 3 mm wood and acrylic
4 × 1.77 in (102 × 45 mm)	4.8 mm	279 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.65 in (152 × 67 mm)	7.2 mm	419 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.54 in (203 × 90 mm)	9.6 mm	559 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.3 in (305 × 135 mm)	14 mm	838 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More otter SVG files

← Sea otter floating on its back All 12 otters Otter with a fish →