Free otter SVG

Sea otter floating on its back SVG

Sea otter floating on its back, as a solid black shape — Sea otter floating on its back. The preview is the SVG file itself.

A sea otter on its back seen from above, holding a clam shell on its tummy with both paws, inside a ring of ripples that its head and tail break through. One piece, with sleepy eyes.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.44 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	892 mm at this size
Narrowest part	1.6 mm at this size
Nodes	262 curve and line segments

Measured from the file. PNG: 1,756 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.41 mm	227 mm	110	Too fine for most machines
1.75 × 2 in (44 × 51 mm)	0.81 mm	453 mm	30	Fine detail: vinyl and paper only, weed with care
2.62 × 3 in (67 × 76 mm)	1.2 mm	680 mm	12	Vinyl, card and thin sheet
3.49 × 4 in (89 × 102 mm)	1.6 mm	906 mm	6	Vinyl, card and thin sheet
5.24 × 6 in (133 × 152 mm)	2.4 mm	1,359 mm	2	Vinyl, card and thin sheet
6.98 × 8 in (177 × 203 mm)	3.3 mm	1,813 mm	1	Any material, including 3 mm wood and acrylic
10.48 × 12 in (266 × 305 mm)	4.9 mm	2,719 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More otter SVG files

← Otter standing up All 12 otters Swimming otter →