Free otter SVG

Otter outline SVG

Otter outline, drawn as a line — Otter outline. The preview is the SVG file itself.

The river otter on all fours drawn as one even line about 2 mm wide, with the gaps between its legs left open. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 39 mm (3.94 × 1.52 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	591 mm at this size
Narrowest part	1.9 mm at this size
Nodes	248 curve and line segments

Measured from the file. PNG: 2,000 × 817 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.39 in (25 × 10 mm)	0.48 mm	150 mm	200	Too fine for most machines
2 × 0.77 in (51 × 20 mm)	0.97 mm	300 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.15 in (76 × 29 mm)	1.4 mm	450 mm	27	Vinyl, card and thin sheet
4 × 1.54 in (102 × 39 mm)	1.9 mm	600 mm	14	Vinyl, card and thin sheet
6 × 2.31 in (152 × 59 mm)	2.9 mm	901 mm	4	Vinyl, card and thin sheet
8 × 3.08 in (203 × 78 mm)	3.9 mm	1,201 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.62 in (305 × 117 mm)	5.8 mm	1,801 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More otter SVG files

← Otter monogram frame All 12 otters Layered sea otter in four colours →