Free otter SVG

Otter with a fish SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Otter with a fish, as a solid black shape
Otter with a fish. The preview is the SVG file itself.

The river otter on all fours with a fish held crosswise in its mouth, tail up and head down. Otter and catch are one piece, with an eye on each. For fishing cabins and river signs.

What is in the file

Size100 × 36 mm (3.94 × 1.41 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length359 mm at this size
Narrowest part1 mm at this size
Nodes153 curve and line segments

Measured from the file. PNG: 2,000 × 765 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.36 in (25 × 9 mm)0.25 mm91 mm210Too fine for most machines
2 × 0.72 in (51 × 18 mm)0.51 mm182 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.07 in (76 × 27 mm)0.76 mm274 mm27Fine detail: vinyl and paper only, weed with care
4 × 1.43 in (102 × 36 mm)1 mm365 mm14Vinyl, card and thin sheet
6 × 2.15 in (152 × 55 mm)1.5 mm547 mm5Vinyl, card and thin sheet
8 × 2.86 in (203 × 73 mm)2 mm729 mm3Vinyl, card and thin sheet
12 × 4.3 in (305 × 109 mm)3 mm1,094 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More otter SVG files

← Swimming otter All 12 otters Cute otter face →