Free otter SVG

Otter monogram frame SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Otter monogram frame, as a solid black shape
Otter monogram frame. The preview is the SVG file itself.

A round frame with a river otter walking along the top of it, its tail trailing down the side. The middle is empty for an initial or a short name: add it so that it touches the ring, and weld.

What is in the file

Size75 × 100 mm (2.93 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length661 mm at this size
Narrowest part1 mm at this size
Nodes164 curve and line segments

Measured from the file. PNG: 1,510 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.75 × 1 in (19 × 25 mm)0.25 mm168 mm120Too fine for most machines
1.49 × 2 in (38 × 51 mm)0.51 mm336 mm35Fine detail: vinyl and paper only, weed with care
2.24 × 3 in (57 × 76 mm)0.76 mm504 mm15Fine detail: vinyl and paper only, weed with care
2.98 × 4 in (76 × 102 mm)1 mm672 mm6Vinyl, card and thin sheet
4.47 × 6 in (114 × 152 mm)1.5 mm1,007 mm2Vinyl, card and thin sheet
5.96 × 8 in (151 × 203 mm)2 mm1,343 mm1Vinyl, card and thin sheet
8.94 × 12 in (227 × 305 mm)3 mm2,015 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More otter SVG files

← Sea otter mother with her pup All 12 otters Otter outline →