Free ninja SVG

Ninja headband with a blank plate SVG

Ninja headband with a blank plate. The preview is the SVG file itself.

A cloth headband tied in a loop, seen from the front: a metal plate with a rivet at each end, and a knot at the side with two long tails. The plate is left blank, with no symbol, for a mark of your own.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.61 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	580 mm at this size
Narrowest part	2.3 mm at this size
Nodes	109 curve and line segments

Measured from the file. PNG: 2,000 × 1,354 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	0.58 mm	147 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.33 in (51 × 34 mm)	1.2 mm	295 mm	35	Vinyl, card and thin sheet
3 × 1.99 in (76 × 51 mm)	1.8 mm	442 mm	15	Vinyl, card and thin sheet
4 × 2.66 in (102 × 67 mm)	2.3 mm	589 mm	8	Vinyl, card and thin sheet
6 × 3.98 in (152 × 101 mm)	3.5 mm	884 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.31 in (203 × 135 mm)	4.7 mm	1,179 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.97 in (305 × 202 mm)	7 mm	1,768 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ninja SVG files

← Ninja shuriken with six blades All 17 ninjas Ninja cat face →