Free ninja SVG

Ninja swords crossed behind a star SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Ninja swords crossed behind a star, as a solid black shape
Ninja swords crossed behind a star. The preview is the SVG file itself.

Two straight swords crossed in an X, each with a line down the blade, an oval guard and a wrapped grip, and a throwing star laid over the place where they cross. The same on both sides.

What is in the file

Size90 × 100 mm (3.54 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length693 mm at this size
Narrowest part1.1 mm at this size
Nodes129 curve and line segments

Measured from the file. PNG: 1,806 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.9 × 1 in (23 × 25 mm)0.28 mm176 mm110Too fine for most machines
1.8 × 2 in (46 × 51 mm)0.56 mm352 mm30Fine detail: vinyl and paper only, weed with care
2.7 × 3 in (69 × 76 mm)0.84 mm528 mm12Fine detail: vinyl and paper only, weed with care
3.6 × 4 in (91 × 102 mm)1.1 mm704 mm6Vinyl, card and thin sheet
5.39 × 6 in (137 × 152 mm)1.7 mm1,056 mm2Vinyl, card and thin sheet
7.19 × 8 in (183 × 203 mm)2.2 mm1,408 mm1Vinyl, card and thin sheet
10.79 × 12 in (274 × 305 mm)3.4 mm2,112 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ninja SVG files

← Birthday ninja in a party hat All 17 ninjas Ninja name sign →