Free ninja SVG

Ninja flying kick SVG

Ninja flying kick, as a solid black shape
Ninja flying kick. The preview is the SVG file itself.

A ninja in mid air with one leg driven out straight and the other tucked under, fists up and headband tails streaming. A plain silhouette for party invitations, kit bags and martial arts club shirts.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 86 mm (3.94 × 3.39 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length563 mm at this size
Narrowest part4.4 mm at this size
Nodes237 curve and line segments

Measured from the file. PNG: 2,000 × 1,735 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.86 in (25 × 22 mm)1.1 mm143 mm110Vinyl, card and thin sheet
2 × 1.72 in (51 × 44 mm)2.2 mm286 mm30Vinyl, card and thin sheet
3 × 2.59 in (76 × 66 mm)3.4 mm429 mm12Any material, including 3 mm wood and acrylic
4 × 3.45 in (102 × 88 mm)4.5 mm572 mm6Any material, including 3 mm wood and acrylic
6 × 5.17 in (152 × 131 mm)6.7 mm858 mm2Any material, including 3 mm wood and acrylic
8 × 6.9 in (203 × 175 mm)8.9 mm1,144 mm1Any material, including 3 mm wood and acrylic
12 × 10.34 in (305 × 263 mm)13 mm1,716 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ninja SVG files

← Ninja face with the eyes showing All 17 ninjas Ninja with a sword raised →