Free ninja SVG

Ninja cat face SVG

Ninja cat face, as a solid black shape
Ninja cat face. The preview is the SVG file itself.

A cat in a ninja hood: two ears, a headband with its tails, cat eyes looking out through the slit, and a nose, a mouth and whiskers cut below it. For children’s shirts and treat bags.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 71 mm (3.94 × 2.78 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length903 mm at this size
Narrowest part3.3 mm at this size
Nodes154 curve and line segments

Measured from the file. PNG: 2,000 × 1,433 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.84 mm229 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.41 in (51 × 36 mm)1.7 mm459 mm35Vinyl, card and thin sheet
3 × 2.11 in (76 × 54 mm)2.5 mm688 mm15Vinyl, card and thin sheet
4 × 2.82 in (102 × 72 mm)3.4 mm917 mm8Any material, including 3 mm wood and acrylic
6 × 4.23 in (152 × 107 mm)5 mm1,376 mm2Any material, including 3 mm wood and acrylic
8 × 5.64 in (203 × 143 mm)6.7 mm1,835 mm2Any material, including 3 mm wood and acrylic
12 × 8.46 in (305 × 215 mm)10 mm2,752 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ninja SVG files

← Ninja headband with a blank plate All 17 ninjas Little ninja for children →