Free ninja SVG

Ninja name sign SVG

Ninja name sign, as a solid black shape
Ninja name sign. The preview is the SVG file itself.

A ninja peeking over the top of a wide blank panel, eyes showing above it and the fingers of both hands hooked over the edge. The panel takes a name, a door sign or a birthday message.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 82 mm (3.94 × 3.21 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length833 mm at this size
Narrowest part1.6 mm at this size
Nodes127 curve and line segments

Measured from the file. PNG: 2,000 × 1,646 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.41 mm212 mm120Too fine for most machines
2 × 1.63 in (51 × 41 mm)0.81 mm423 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.45 in (76 × 62 mm)1.2 mm635 mm12Vinyl, card and thin sheet
4 × 3.26 in (102 × 83 mm)1.6 mm846 mm6Vinyl, card and thin sheet
6 × 4.9 in (152 × 124 mm)2.4 mm1,269 mm2Vinyl, card and thin sheet
8 × 6.53 in (203 × 166 mm)3.3 mm1,693 mm1Any material, including 3 mm wood and acrylic
12 × 9.79 in (305 × 249 mm)4.9 mm2,539 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ninja SVG files

← Ninja swords crossed behind a star All 17 ninjas Ninja face outline →