Free ninja SVG

Ninja face outline SVG

Ninja face outline, drawn as a line
Ninja face outline. The preview is the SVG file itself.

The hooded face as an even line: the round hood, the headband, the eye slit hanging from it with both eyes, and the knot with its two tails. For colouring pages, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 67 mm (3.94 × 2.65 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,040 mm at this size
Narrowest part2 mm at this size
Nodes135 curve and line segments

Measured from the file. PNG: 2,000 × 1,369 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.51 mm264 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.34 in (51 × 34 mm)1 mm528 mm35Vinyl, card and thin sheet
3 × 2.02 in (76 × 51 mm)1.5 mm792 mm15Vinyl, card and thin sheet
4 × 2.69 in (102 × 68 mm)2 mm1,057 mm8Vinyl, card and thin sheet
6 × 4.03 in (152 × 102 mm)3 mm1,585 mm2Any material, including 3 mm wood and acrylic
8 × 5.38 in (203 × 137 mm)4.1 mm2,113 mm2Any material, including 3 mm wood and acrylic
12 × 8.06 in (305 × 205 mm)6.1 mm3,170 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ninja SVG files

← Ninja name sign All 17 ninjas Layered ninja face in four colours →