Free Nana Claus SVG

Nana Claus in Kaushan Script SVG

Nana Claus in Kaushan Script, as a solid black shape — Nana Claus in Kaushan Script. The preview is the SVG file itself.

“Nana Claus” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 95 mm (3.94 × 3.74 in), scales to any size
Pieces	9 separate pieces
Outlines to cut	10: 9 outer edges and 1 cut-out
Cut length	1,255 mm at this size
Narrowest part	1.9 mm at this size
Nodes	407 curve and line segments

Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.95 in (25 × 24 mm)	0.48 mm	319 mm	100	Too fine for most machines
2 × 1.9 in (51 × 48 mm)	0.97 mm	638 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.85 in (76 × 72 mm)	1.4 mm	956 mm	9	Vinyl, card and thin sheet
4 × 3.8 in (102 × 97 mm)	1.9 mm	1,275 mm	6	Vinyl, card and thin sheet
6 × 5.71 in (152 × 145 mm)	2.9 mm	1,913 mm	2	Vinyl, card and thin sheet
8 × 7.61 in (203 × 193 mm)	3.9 mm	2,550 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.41 in (305 × 290 mm)	5.8 mm	3,825 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Nana Claus SVG files

← Nana Claus in Lobster All 12 Nana Claus designs Nana Claus in Lilita One →