Free Nana Claus SVG

Nana Claus outline lettering SVG

Nana Claus outline lettering, drawn as a line — Nana Claus outline lettering. The preview is the SVG file itself.

“Nana Claus” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.94 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	24: 12 outer edges and 12 cut-outs
Cut length	1,734 mm at this size
Narrowest part	1.4 mm at this size
Nodes	408 curve and line segments

Measured from the file. PNG: 2,000 × 1,515 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	0.36 mm	440 mm	120	Too fine for most machines
2 × 1.5 in (51 × 38 mm)	0.71 mm	881 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.24 in (76 × 57 mm)	1.1 mm	1,321 mm	12	Vinyl, card and thin sheet
4 × 2.99 in (102 × 76 mm)	1.4 mm	1,762 mm	6	Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)	2.1 mm	2,643 mm	2	Vinyl, card and thin sheet
8 × 5.98 in (203 × 152 mm)	2.8 mm	3,523 mm	1	Vinyl, card and thin sheet
12 × 8.98 in (305 × 228 mm)	4.3 mm	5,285 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Nana Claus SVG files

← Nana Claus with stars All 12 Nana Claus designs Nana Claus stencil plate →