Nana Claus in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Nana Claus” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.75 in), scales to any size |
|---|---|
| Pieces | 9 separate pieces |
| Outlines to cut | 12: 9 outer edges and 3 cut-outs |
| Cut length | 1,040 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 194 curve and line segments |
Measured from the file. PNG: 2,000 × 1,419 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 0.86 mm | 264 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.4 in (51 × 35 mm) | 1.7 mm | 528 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.09 in (76 × 53 mm) | 2.6 mm | 792 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.79 in (102 × 71 mm) | 3.5 mm | 1,057 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 4.19 in (152 × 106 mm) | 5.2 mm | 1,585 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.58 in (203 × 142 mm) | 6.9 mm | 2,113 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.38 in (305 × 213 mm) | 10 mm | 3,170 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Nana Claus SVG files
-
Nana Claus in Amatic SC Solid · 9 pieces
-
Nana Claus in block capitals Solid · 9 pieces
-
Nana Claus in script and capitals Solid · 6 pieces
-
Nana Claus with stars Solid · 9 pieces
-
Nana Claus outline lettering Outline · 12 pieces
-
Nana Claus stencil plate Solid · one piece
-
Nana Claus with a drop shadow Layered · 4 pieces
-
Nana Claus with a Santa hat Solid · 7 pieces
← Nana Claus in Lilita One All 13 Nana Claus designs Nana Claus in Amatic SC →